Drill chucks

KEYLESS DRILL CHUCKS
 TYPE : INT

INTEGRATED TYPE KEYLESS DRILL CHUCKS
The main shaft is of integrated type, which is much more superior than the traditional design. The major features are as follows


Extremely rigid construction
The accumulative tolerances can be reduced to a minimum, since the traditional mechanism requiring an ARBOR to connect the Drill Chucks which will generate the accumulative tolerances. The Integrated type keyless drill chuck is designed to solve this problem totally.
Prevent the Drill Chucks from falling out.
Extremely safe in operation.

TAIWAN PAT. NO.75900
USA PAT. NO. 5275516
Type Clamping Capacity Taper DIN or Jacobs
INT-8 0-8(mm) ; 0-5/16" (inch) MT2 ; JC20
INT-13 0-13(mm) ; 0-1/2 " (inch) R-8 ; JC3/4" ; MT4 ; MT2 , MT3 ; JC20 ; JC25
INT-16 3-16(mm) ; 1/8"-5/8 " (inch) 32 ; JC20 ; JC25 ; MT4 ; R-8

KPU TYPE PRECISION KEYLESS DRILL CHUCK HEADS



These chuck heads are specially designed for application in CNC keyless drill chucks. They are designed and manufactured to the highest engineering standards. The female thread inside the short type MORSE TAPER SHANK. Make it possible to be firmly screwed together with CNC TOOL SHANK and becomes and INTEGRAL CNC DRILL CHUCKS.


Main Features :
Being an integral design, the drill chuck heads once screwedtogether with TOOL HOLDER shank, the drill chucks will neverbe disengaged from the tool Holder Shanks.
Very high rigidity due to the special design.
Excellent performance and reliability.
High durability and easy to operate.
Superb accuracy is quaranteed because of 100% inspection andstrict quality control.
Type Clamping Capacity Female Taper DIN or Jacobs
KPU-8 0-8(mm) ; 0-5/16" (inch)
MT2
KPU-13 0-13(mm) ; 0-1/2 " (inch)
MT3
KPU-16 0-16(mm) ; 1/8"-5/8 " (inch
MT3


KEYLESS DRILL CHUCKS
 TYPE : XHSP
Special design & manufacture against for super heavy torque (Clamping capacity) use.
Owing to inspecting strictly & with excellent RUN-OUT accuracy and quality guaranteed the gripping power is double than the general brand.
Avoid the drill dropped when used in instant change of direction and equipped with spanner for tightening perfect safety.
Especially suitable for CNC machining center & milling machine use.
Type Clamping Capacity Female Taper DIN or Jacobs
8XHSP 0-8(mm) ; 0-5/16" (inch) J2 ; B10 ; J1 ; B12
10XHSP 0-10(mm) ; 0-3/8 " (inch) J33 ; J2S ; B12 ; B16
13XHSP 0-13(mm) ; 0-1/2" (inch) J6 ; J33; B16 ;
16XHSP 3-16(mm); 1/8"-5/8"(inch) J6; J3; B16; B18


NEXT