Drill chucks

BALL BEARING KEY TYPE SUPER CHUCKS
TYPE : BXH
Suitable for heavy duty drilling use.
By using anti-thrust bearing to increase the gripping power, so that, high speed drilling can be performed
All parts hardened by heat treatment and precision ground precision can be lasted, super clamping power.

Type Clamping Capacity Female Taper DIN or Jacobs
10BXH 1-10(mm) ; 1/32"-3/8" (inch)
J2S
13BXH 1-13(mm) ; 1/32-1/2 " (inch)
J3 ; J6
16BXH 1-16(mm) ; 1/32"-5/8 " (inch)
J3
19BXH 1-19(mm) ; 1/32"-3/4 " (inch)
J4
25BXH 5-25(mm) ; 3/16"-1 " (inch)
J5


Run-out Accuracy & Torsion Inspection Table
Type 10BXHG6H 13BXH 16BXH 19BXH 25BXH
Ø dmm
9 12 15 18 24
L mm 110 140 150 150 180
L1 mm 85 110 120 120 140
Max Run-out 0.08 0.08 0.08 0.08 0.08
Torque kgf-cm 170 270 300 400 500

Material Analysis Table
Parts No. Parts Name Material Heat-Treatment
1 Body JIS 4051
SAE 1045		 HRC45-48
2 Conical sleevve JIS 4018
SAE 1018		 HRC38-40
3 Jaws JIS SUJ2
SAE 52100
HRC55 ± 2
4 Nut JIS SUJ2
SAE 52100
HRC60 ± 2
5   JIS SUJ2
SAE 52100
HRC60 ± 2
6 Ball JIS G4018
SAE 1018		  


DRILL CHUCK ADAPTERS
TYPE Front View Dmm Lmm 1 Pcs(g) Q,ty Pcs/ Cu-FT N.W/ G.W
kgs

3GO-THRU SLOT ORDER NO.17001		 10 44 50 500/0.85 25/26

2GO-THRU SLOT ORDER NO.17002		 10 44 50 500/0.85 25/26

ORDER NO.17003		 9.35 38 48 500/0.85 24/25

3GO-THRU SLOT ORDER NO.17005		 10 44 50 500/0.85 25/26

2GO-THRU SLOT ORDER NO.17006		 10 44 50 500/0.85 25/26

TAPER SHANK ARBORS WITH TANG FOR DRILL CHUCKS



MORSE TAPER MTType ORDER NO DRILL CHUCK TAPER
DIN 238 JACOBS
B10 B12 B16 B18 B22 B24 1 2A 3 6 33 4
1 15001 15002 15003 15004     15005 15006   15008 15000  
2 15009 15010 15011 15012 15022     15015 15016 15017 15018  
3     15020 15021 15030 15031   15024 15025 15026 15026 15042
4     15028 15029 15045 15046     15032 15033 15039 15040


REDUCING SLEEVES



EXTERNAL TAPER MT 1 2 3 3 4 4 4
INTERNAL TAPER MT 0 1 2 1 3 2 1
LENGTH mm 80 92 112 99 140 124 124
WEIIGHT APPROX. g 30 95 190 250 360 480 550
ORDER NO. 16001 16002 16003 16004 16005 16006 16007

EXTERNAL TAPER MT 5 5 5 5 6 6 6 6
INTERNAL TAPER MT 4 3 2 1 5 4 3 2
LENGTH mm 171 156 156 156 218 218 218 218
WEIIGHT APPROX. g 950 1360 1520 1700 2550 3600 4100 4300
ORDER NO. 16008 16009 16010 16011 16012 16013 16014 16015


HAND-TIGHTENED KEYLESS DRILL CHUCKS


Tremendously enhance gripping power than traditional key type drill chucks.
Very easy and convenient for bit changeover.
Eliminates "lost key" problems.
Resists impact damage and rust-free by its high quality engineered plastic body.
100% inspection for every chucks, quality guaranteed.
To be used for original equipment on new power tools or replacement chucks.

Type Clamping Capacity
mm
inch 		Female Taper DIN or Jacobs Female Thread Inch or metric OUTER
ø
mm		 Length W t g QTY PCS/ Cu-FU N.W./G.W
kgs		 Order No.
open
B
mm 		closed
C
mm
10KS 1-10
1-32"-3/8"
ø 5.5X90o
3/8-24 40 55 65 160 60/0.6 9/10 13100
13KS 1-13   1/2-20              




BACK NEXT